Cost-Effective
ArtDio IPF-2002L VoIP phone can save you monthly phone bills and reduce operating costs by converging voice and data. Its free charge to make phone long-distance calls by Internet. Or you can setup a DID number in IPF-2002L that guarantees savings on monthly bills and while keeping your VoIP phone as a common phone. No need to learn dialing procedure, just pick up the phone and dial.
Minimum Infrastructure Requirements
To program the IPF-2002L phone, you can use any web browser. The IPF-2002L VoIP phone can be operated and used without a computer, what you need is Broadband Internet Connection and a common router and presto - you are ready to go!
Two Ethernet Port with Switch Function
Artdio IPF-2002L can support two Ethernet Port with Ethernet Switch, 10/100 Base-T Auto-Negotiation MDI/MDI-X (Auto cross over) for the high quality LAN application.
High Quality Phone Call
Featuring the adaptive jitter buffer that adjusts to changes in bandwidth, delay and background noise, IPF-2002L VoIP phone offers excellent voice quality.
Compatibility
IPF-2002L is fully compatible with H.323 v4, MGCP and SIP standards, and supports new broadband solutions, such as xDSL, Cable Modem.
ArtDio's IPF-2002L is a full-featured VoIP telephone with hands-free speaker phone. It is best suited for residential users, SOHO, and small businesses. IPF-2000 is interoperable with the most used protocols in the internet telephony industry. Users can easily register with a service provider that offers SIP, H.323 or MGCP services and benefit from their cost saving communication plans.
With ArtDio?s unique VoIP technology, IPF-2002L is the leader in voice quality amongst competitors. Its plug-and-play capability allows internet telephony service providers to easily deploy IPF-2002L at their client?s premises.
Voice
Call Control Protocol: H.323 V4 or MGCP or SIP(option)
Voice Compression: G.711 A/g -Law, G.723.1, G.729A/B/AB
Support Silence Suppression, VAD, CNG, Acoustic Echo Cancellation, Jitter Buffering
Echo Cancellation: G.165 16ms
Delayed (End to End): < 100ms
Flow of the average: 10-12k bit/s
DTMF tone detection
E.164 Dial plan
LAN Interfaces
Interface: Two 10/100 Base-T Auto-Negotiation, MDI/MDI-X Ethernet Port
Connectors Type: RJ-45 connector
Networking Protocol
PPPoE
DHCP client/Static IP
UDP/TCP
RTP/RTCP
FTP/HTTP/DNS
Dialing Methods
On-hook dialing
Redial key dialing the last dialed numbers
Extension number dialing through gatekeeper/SIP proxy server
Direct IP address dialing to IP phone or gatekeeper/ SIP proxy server
Management Functions
Web browser based management provided
Phone set configuration
Display: 32 characters LCD display (2 lines with 16 characters each)
Environmental
Operation Temperature: 0 - 40 Degrees C (32 - 104 Degrees F)
Storage Temperature: -30 - 65 Degrees C (-22 - 149 Degrees F)
Relative Humidity: 10 V 95% Non-Condensing
Power
Input AC Range: 100 V 240VAC, 50 V 60Hz
Input DC Range: 5VDC, 1A
Power Consumption: 3W
Other Information
Data Memory: 16MB
Procedure Memory: 8MB Flash memory
NAT Pass-through (SIP with STUN)
Call Hold, Call Mute, Call Status, Caller ID
Headset Connector, Speaker Phone, Networking Status
Phone Book, Volume Adjustment, Firmware Upgrade
No-Answer Call Forward, Busy Call Forward, Always Call Forward
Miss-Call, Dialed-Call, Answered-Call, Last Number Redial, Speedy Dial
Voice Response, Web configuration, LCD Display, LED indicators...etc.
Feature KeysGCalled, Answered, Miss-Call, Phone, Network-Setting(IP/Subnet Mask/Gateway/Server IP)
Speedy-Dial, Call-Hold, Redial, Mute, Volume Up/Down, Handsfree
