Most of the VoIP SIP Gateways and ATA (Analog Terminal Adapters) in the market today are configured only with FXS ports, which simply means you can only connect a Phone or a FAX into your gateway or ATA. But what if you wanted to connect your VoIP gateway to a (PSTN) real phone line? You would then have to buy a gateway that is equipped with FXO ports (each port would normally cost you between $65 - $90)...

Presto! Here comes SIPCPE FX200 VoIP FXO Converter. You can now use your regular gateway and acquire transparent access to your local PSTN line. With the FX-200, you can use "Transit In" and "Transit Out" features with your gateway or ATA in conjuction with your current VoIP service.

With the SIP CPE FX-200 VoIP Port Converter, you can use your low-cost Voice over IP service to make and receive telephone calls even when you're on the road.

Want to make a free call to Hongkong? Simply install one of our FX-200 SipCPE in your Vonage or Packet8 box in Hongkong, and presto - you are calling for Free!

Callers to a telephone line connected to the FX-200 receive dial tone from the VoIP adaptor, and are able to make a call the way they would if connected directly to the adaptor with a normal handset.

Want to place a VOIP call while traveling or away from your office? With the FX200, simply call the number of a telephone line connected to the FX-200 from an outside line or cell phone. Callers to a telephone line connected to the FX-200 receive dial tone from the VoIP adaptor, and are able to make a call seamlessly, as though connected directly to the adapter with a normal handset.

Additionally, you can program the FX-200 to dial a VOIP number automatically whenever you call a local PSTN number.

Now your Vonage, ICH, FWD, Sipphone or other VOIP callers can reach you when you are out of the home or office. Using an existing telephone line in your home or office, the FX-200 can be quickly, easily and even remotely configured to auto call forward or "transfer" your VOIP calls from your VoIP adaptor to any local telephone number even to your cell phone. VOIP callers will receive local dial tone after a set number of rings. With the FX-200's Transit Out feature with Auto Call Forwarding, missed VOIP calls are a thing of the past.

You can even program the FX-200 to dial a VOIP number automatically whenever you call a local PSTN number. For example, if you are using the Vonage, ICH, Packet8 SipPhone or FWD service with your VoIP adaptor installed in, say, Hong Kong, and connected the FX-200 to it and to a local telephone line in Hong Kong, you can then set the FX-200 to Auto Call Forward all calls to your local Hong Kong PSTN number to any VOIP number you are permitted to call with your VOIP service.

Want your Vonage, ICH, FWD, Sipphone or other VOIP callers to be able to reach you when you are out of the home or office? By using an existing telephone line in your home or office the FX-200 can be quickly, easily and even be remotely configured to auto call forward or "transfer" your VOIP calls from your VoIP adaptor to any local telephone number even to your cell phone. VOIP callers will receive local dial tone after a set number of rings. With the FX-200's Transit Out feature with Auto Call Forwarding, missed VOIP calls are a thing of the past.